Torx screw 3.5 x 5 D6...
Torx screw 3,5 x 5 D=6 d=M3.5 L=5 T15
Torx screw 3,5 x 5 D=6 d=M3.5 L=5 T15
- -10%
- -10%
There are 1088 products.
Active filters
Torx screw 3,5 x 5 D=6 d=M3.5 L=5 T15
Torx screw 3,5 x 5 D=6 d=M3.5 L=5 T15
Reduction sleeve 10-12mm
Reduction sleeve 10-12mm
Reduction sleeve 8-12 mm
Reduction sleeve 8-12 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 6 -10 mm
Reduction sleeve 6 -10 mm
Reduction sleeve 6 - 8mm
Reduction sleeve 6 - 8mm
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Plastic coated steel bearings d = 6,35 mm D=22 mm
Plastic coated steel bearings d = 6,35 mm D=22 mm
Plastic coated steel bearings d = 6,35 mm D=18 mm
Plastic coated steel bearings d = 6,35 mm D=18 mm
Plastic coated steel bearings d = 6,35 mm D=16 mm
Plastic coated steel bearings d = 6,35 mm D=16 mm
Plastic coated steel bearings d = 6,35 mm D=12.7 mm
Plastic coated steel bearings d = 6,35 mm D=12.7 mm
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Replacement shank for ROS22-12 12 d=6.35 S=12
Replacement shank for ROS22-12 12 d=6.35 S=12
Plastic coated steel bearings d = 6,35 mm D=28 mm
Plastic coated steel bearings d = 6,35 mm D=28 mm
Plastic coated steel bearings d = 6,35 mm D=25 mm
Plastic coated steel bearings d = 6,35 mm D=25 mm
Plastic coated steel bearings d = 6,35 mm D=20 mm
Plastic coated steel bearings d = 6,35 mm D=20 mm
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation